Specialty Prefeeders
Standard Products
EC-Series Bulk Product Conveyor
Product Overview
The Shibuya Hoppmann EC-Series Bulk Product Conveyor can be used as a bulk conveying system or can be modified to accommodate a bulk hopper for any prefeeding need. This low cost conveyor uses formed edge product rails which are slotted to adjust the amount of clearance between the belt cleats and the side walls, rugged 3/8” thick belt cleats for heavy duty applications, and a product well at the base to prevent parts from falling. The EC Bulk Product Conveyor speeds of over 60 feet per minute can be achieved, allowing for the movement of large quantities of parts.
| Part Number | FT301RLASA | |
|---|---|---|
| Motor Style | AC | |
| Motor Voltage | 230/460V | |
| Horsepower | 1/3hp | |
| Total Equipment Weight | 350lbs./159kg | |
| Part Number | EC0812MASA |
|---|---|
| Motor Style | AC |
| Motor Voltage* | 230/460V |
| Horsepower | 1/2hp |
| Total Equipment Weight** | 500lbs. / 227kg |
*Motor is optional.
** Dependent upon length.
Standard Features
- All stainless steel exterior construction
- FDA approved ABS vacuum formed disc
- Teflon Hardcoat Anodized aluminum bowl
- 304 stainless steel exterior construction
- Four (4′) foot through twelve (12′) foot lengths available in 1 foot increments
- 4.00″ diameter pulleys
- FDA/USDA white PVC belt with heavy duty 2″ tall cleats
- Adjustable formed edge product rails
- Direct drive, side mount reducer (can be mounted on either side)
Available Options
- Polycarbonate covers
- Dual motor drive system
- Washdown motor(s)
- NEMA 1 encased controller
- DC/AC motors available in 90VDC, 115VAC, 230VAC and 460VAC
- Stainless steel support stand
- Washdown bearings
- Longer conveyor lengths
- Other cleat pitches available
- Custom chutes available
| Product Specifications | ANSI | Metric | |
|---|---|---|---|
| A | Outside Diameter | 40.10″ | 1018.5 mm |
| B | Overall Frame Height | 27.13″ | 689.1 mm |
| C | Bowl Discharge Height * | 17.88″ | 454.2mm |
| D | Bowl Outside Diameter | 36.13″ | 917.7 mm |
| E | Bowl Inside Diameter | 28.80″ | 731.5 mm |
| F | Rim Width | 3.67″ | 93.2 mm |
| G | Bowl Depth | 4.50″ | 114.3 mm |
| H | Level Foot Adjustment * | 2.75″ | 69.9 mm |
| Product Specifications | ANSI | Metric | |
|---|---|---|---|
| A | Overall Length of Channel | 5′ (60″) – 13′ (156″) | 1524 mm – 3963 mm |
| B | Pulley Center Distance | 4′ (48″) – 12′ (144″) | 1219 mm – 3658 mm |
| C | Channel (Bed) Width | 16.00″ | 406 mm |
| D | Belt Width | 12.00″ | 305 mm |
| E | Cleat Pitch (Standard) | 12.00″ | 305 mm |
The leveling foot has a vertical adjustment of ±1.75”, allowing for a height variation between 1.00” and 4.50”. This may alter the discharge height.
Required Accessories for the FT-15-RD Unscrambler:
- Clockwise Square Tooling Frame and Backup Ring – BUCWFT30SU
- Counterclockwise Square Tooling Frame and Backup Ring – BUCCFT30SU
Shibuya Hoppmann Corporation strives to improve its products and reserves the right to change or discontinue specifications and designs shown in this information sheet without notice and without incurring obligation. Revised: 05/18.