FT Series Centrifugal Feeder
Standard Products
FT-70-RD Bowl Feeder
Product Overview
Shibuya Hoppmann’s brand new FT-70-RD bowl feeder with rigid disc, uses centrifugal feeding to orient and singulate small, medium or large parts at high rates with its unique design and robust construction, and is one of the largest centrifugal feeders available on the market today. The 12” bowl depth allows for much larger parts handling than previously fed by similar feeder bowls. Product is metered into the bowl and brought out to the bowl rim where a series of qualifiers gently orient the part for transfer to various downstream inline devices. Note: Tooling is not included with this unit.
| Part Number | FT301RLASA | |
|---|---|---|
| Motor Style | AC | |
| Motor Voltage | 230/460V | |
| Horsepower | 1/3hp | |
| Total Equipment Weight | 350lbs./159kg | |
| Part Number | FT701RLASA |
|---|---|
| Motor Style | AC |
| Motor Voltage | 208-230 / 460V |
| Horsepower | 3 / 4hp |
| Total Equipment Weight | 1400lbs. / 635kg |
Standard Features
- All stainless steel exterior construction
- FDA approved ABS vacuum formed disc
- Teflon Hardcoat Anodized aluminum bowl
- All stainless steel exterior construction
- FDA approved ABS vacuum formed disc
- Teflon Hardcoat Anodized aluminum bowl
Available Options
- Polycarbonate covers
- Dual motor drive system
- Washdown motor(s)
- NEMA 1 encased controller
- Hinged polycarbonate covers with gas struts
- Washdown motor(s)
- NEMA 1 encased controller
| Product Specifications | ANSI | Metric | |
|---|---|---|---|
| A | Outside Diameter | 40.10″ | 1018.5 mm |
| B | Overall Frame Height | 27.13″ | 689.1 mm |
| C | Bowl Discharge Height * | 17.88″ | 454.2mm |
| D | Bowl Outside Diameter | 36.13″ | 917.7 mm |
| E | Bowl Inside Diameter | 28.80″ | 731.5 mm |
| F | Rim Width | 3.67″ | 93.2 mm |
| G | Bowl Depth | 4.50″ | 114.3 mm |
| H | Level Foot Adjustment * | 2.75″ | 69.9 mm |
| Product Specifications | ANSI | Metric | |
|---|---|---|---|
| A | Outside Diameter | 94.50″ | 2400.3 mm |
| B | Overall Height | 56.00″ ± 1.50″ | 1422.4 ± 38.1 mm |
| C | Bowl Discharge Height | 42.00″ ± 1.50″ | 1066.8 ± 38.1 mm |
| D | Bowl Outside Diameter | 80.00″ | 2032.0 mm |
| E | Bowl Inside Diameter | 70.00″ | 1778.0 mm |
| F | Rim Width | 5.00″ | 127.0 mm |
| G | Bowl Depth | 12.25″ | 311.2 mm |
| H | Level Foot Adjustment | 3.58″ ± 1.50″ | 90.9 ± 38.1 mm |
The leveling foot has a vertical adjustment of ±1.75”, allowing for a height variation between 1.00” and 4.50”. This may alter the discharge height.
Required Accessories for the FT-15-RD Unscrambler:
- Clockwise Square Tooling Frame and Backup Ring – BUCWFT30SU
- Counterclockwise Square Tooling Frame and Backup Ring – BUCCFT30SU
- Clockwise Backup Ring – BUCWFT70SU
- Counterclockwise Backup Ring – BUCCFT70SU
Shibuya Hoppmann Corporation strives to improve its products and reserves the right to change or discontinue specifications and designs shown in this information sheet without notice and without incurring obligation. Revised: 05/18.