FS Series Centrifugal Feeders
Standard Products
FS-70 Scallop Feeder
Product Overview
Our brand new Hoppmann™ FS-70 scallop centrifugal feeder is created to feed small, medium or large parts at high rates with its unique design, custom scallops and robust construction, and is one of the largest centrifugal feeders available on the market today. Rates vary based on the part profiles. Parts are radially oriented and gently qualified in the scallop pockets by means of qualifiers, wipers, pneumatic and/or electrical devices depending on specific product characteristics. Note: Tooling and scallops are not included with the standard FS-70 scallop feeder.
| Part Number | FT301RLASA | |
|---|---|---|
| Motor Style | AC | |
| Motor Voltage | 230/460V | |
| Horsepower | 1/3hp | |
| Total Equipment Weight | 350lbs./159kg | |
| Part Number | FS701RLASA | |
|---|---|---|
| Motor Style | AC | |
| Motor Voltage | 208-230/460V | |
| Horsepower | 1hp | |
| Total Equipment Weight | 3750lbs. / 1701kg | |
Standard Features
- All stainless steel exterior construction
- FDA approved ABS vacuum formed disc
- Teflon Hardcoat Anodized aluminum bowl
- All stainless steel exterior construction
- FDA approved ABS vacuum formed disc
- Teflon Hardcoat Anodized aluminum bowl
- Air clutch
- Hinged polycarbonate cover with safety interlocks
- Backup ring
Available Options
- Polycarbonate covers
- Dual motor drive system
- Washdown motor(s)
- NEMA 1 encased controller
- Urethane scallop kit
- Washdown motor(s)
- NEMA 1 encased controller
| Product Specifications | ANSI | Metric | |
|---|---|---|---|
| A | Outside Diameter | 40.10″ | 1018.5 mm |
| B | Overall Frame Height | 27.13″ | 689.1 mm |
| C | Bowl Discharge Height * | 17.88″ | 454.2mm |
| D | Bowl Outside Diameter | 36.13″ | 917.7 mm |
| E | Bowl Inside Diameter | 28.80″ | 731.5 mm |
| F | Rim Width | 3.67″ | 93.2 mm |
| G | Bowl Depth | 4.50″ | 114.3 mm |
| H | Level Foot Adjustment * | 2.75″ | 69.9 mm |
| Product Specifications | ANSI | Metric | |
|---|---|---|---|
| A | Outside Diameter | 110.50″ | 2807.0 mm |
| B | Overall Height | 63.00″ | 1600.0 mm |
| C | Bowl Discharge Height | 36.00″ | 914.4 mm |
| D | Bowl Outside Diameter | 75.00″ | 1905.0 mm |
| E | Scallop Edge Outside Diameter | 94.00″ | 2387.6 mm |
| F | Bowl Inside Diameter | 70.00″ | 920.8 mm |
| G | Rim Width | 5.00″ | 127.0 mm |
| H | Bowl Depth | 9.50″ | 241.3 mm |
| I | Level Foot Adjustment | 5.00″ ± 2.00″ | 127.0 ± 50.8 mm |
The leveling foot has a vertical adjustment of ±1.75”, allowing for a height variation between 1.00” and 4.50”. This may alter the discharge height.
Required Accessories for the FT-15-RD Unscrambler:
- Clockwise Square Tooling Frame and Backup Ring – BUCWFT30SU
- Counterclockwise Square Tooling Frame and Backup Ring – BUCCFT30SU
- FS Custom Scallops
Shibuya Hoppmann Corporation strives to improve its products and reserves the right to change or discontinue specifications and designs shown in this information sheet without notice and without incurring obligation. Revised: 05/18.