Specialty Feeders and Unscramblers
Standard Products
FRS-60 Centrifugal Feeder
Product Overview
Shibuya Hoppmann’s standard FRS-60 Centrifugal Feeder is specifically designed to feed a wide range of large bottles and parts. The delivery rate varies from moderate to high speed depending on part characteristics. The FRS-60 centrifugal feeder is engineered to interface with Shibuya Hoppmann prefeeders, accumulating conveyors, assembly systems and other downstream equipment. Note: Tooling is not included with this unit.
| Part Number | FT301RLASA | |
|---|---|---|
| Motor Style | AC | |
| Motor Voltage | 230/460V | |
| Horsepower | 1/3hp | |
| Total Equipment Weight | 350lbs./159kg | |
| Part Number | RS60XXXASA |
|---|---|
| Motor Style | AC |
| Motor Voltage | 208-230 / 460V |
| Horsepower | 3 / 4hp |
| Total Equipment Weight | 2500lbs. / 1134kg |
Standard Features
- All stainless steel exterior construction
- FDA approved ABS vacuum formed disc
- Teflon Hardcoat Anodized aluminum bowl
- All stainless steel exterior construction
- Air clutch
- Teflon Hardcoat Anodized aluminmum bowl predrilled for scallop mounting
- FRS-60 Centrifugal Feeder Back up ring
- Polycarbonate safety covers
Available Options
- Polycarbonate covers
- Dual motor drive system
- Washdown motor(s)
- NEMA 1 encased controller
- Urethane scallop kit
- Washdown motor
- NEMA 1 encased controller
| Product Specifications | ANSI | Metric | |
|---|---|---|---|
| A | Outside Diameter | 40.10″ | 1018.5 mm |
| B | Overall Frame Height | 27.13″ | 689.1 mm |
| C | Bowl Discharge Height * | 17.88″ | 454.2mm |
| D | Bowl Outside Diameter | 36.13″ | 917.7 mm |
| E | Bowl Inside Diameter | 28.80″ | 731.5 mm |
| F | Rim Width | 3.67″ | 93.2 mm |
| G | Bowl Depth | 4.50″ | 114.3 mm |
| H | Level Foot Adjustment * | 2.75″ | 69.9 mm |
| Product Specifications | ANSI | Metric | |
|---|---|---|---|
| A | Overall Width at Exit Zone | 85.00″ | 2159.0 mm |
| B | Overall Width | 82.00″ | 2083.0 mm |
| C | Overall Height | 66.00″ ± 5″ | 1676.0 ± 127 mm |
| D | Discharge Height | 40.00″ ± 5″ | 1016.0 ± 127 mm |
| E | Bowl Inside Diameter | 51.79″ | 1315.0 mm |
| F | Rim Width | 3.61″ | 91.7 mm |
| G | Scallop Length | 12.00″ | 305.0 mm |
The leveling foot has a vertical adjustment of ±1.75”, allowing for a height variation between 1.00” and 4.50”. This may alter the discharge height.
Required Accessories for the FT-15-RD Unscrambler:
- Clockwise Square Tooling Frame and Backup Ring – BUCWFT30SU
- Counterclockwise Square Tooling Frame and Backup Ring – BUCCFT30SU
- FRS Series Scallop Kit (both styles) – URTHCAST64
Shibuya Hoppmann Corporation strives to improve its products and reserves the right to change or discontinue specifications and designs shown in this information sheet without notice and without incurring obligation. Revised: 05/18.