Elevating Prefeeders
Standard Products
ET-02 Table Top Prefeeder
Product Overview
The Shibuya Hoppmann ET-02 Table Top Elevating Prefeeder is designed to handle a variety of small sized, light weight parts with both an adjustable base and head chute to accommodate small product loading and delivery variances. The concept is based on the standard sized elevating prefeeders but has a more compact footprint and can be mounted on top of an existing support table.
| Part Number | FT301RLASA | |
|---|---|---|
| Motor Style | AC | |
| Motor Voltage | 230/460V | |
| Horsepower | 1/3hp | |
| Total Equipment Weight | 350lbs./159kg | |
| Part Number | ET0206XASA |
|---|---|
| Motor Style | AC |
| Motor Voltage | 220/380V |
| Horsepower | 1/5hp |
| Total Equipment Weight | 185lbs. / 83.9kg |
| Hopper Capacity (ET-02/03/04) | 2–3–4 cu.ft.
56–85–113 liters |
Standard Features
- All stainless steel exterior construction
- FDA approved ABS vacuum formed disc
- Teflon Hardcoat Anodized aluminum bowl
- Stainless steel construction
- Belt (6″ width belt, 4″ pitch with 1.5″ cleat) FDA/USDA approved white 1-ply solid woven polyester fabric with 1/16″ thick white PVC coating and PVC cleats
- Hopper clean out door
Available Options
- Polycarbonate covers
- Dual motor drive system
- Washdown motor(s)
- NEMA 1 encased controller
- 18”, 24”, 36” and 54” elevator extensions available
- Safety cover package
- Elevator extensions available in 12″ increments
- Hopper extensions available
- Optional belt styles and widths – Standard cleat for 85˚ tilt, blue sanitary belt, super cleat belt
| Product Specifications | ANSI | Metric | |
|---|---|---|---|
| A | Outside Diameter | 40.10″ | 1018.5 mm |
| B | Overall Frame Height | 27.13″ | 689.1 mm |
| C | Bowl Discharge Height * | 17.88″ | 454.2mm |
| D | Bowl Outside Diameter | 36.13″ | 917.7 mm |
| E | Bowl Inside Diameter | 28.80″ | 731.5 mm |
| F | Rim Width | 3.67″ | 93.2 mm |
| G | Bowl Depth | 4.50″ | 114.3 mm |
| H | Level Foot Adjustment * | 2.75″ | 69.9 mm |
| Product Specifications | ANSI | Metric | |
|---|---|---|---|
| A | Overall Width | 24.03″ | 610.3 mm |
| B | Overall Length | 39.77″ | 1010.2 mm |
| C | Lower Footprint | 32.90″ | 835.7 mm |
| D | Discharge Height | 25.13″ | 638.3 mm |
| E | Hopper Load Height* (ET-02) | 26.23″ | 667 mm |
| E | Hopper Load Height* (ET-03) | 28.80″ | 731.5 mm |
| E | Hopper Load Height* (ET-04) | 32.00″ | 812.8mm |
| F | Belt Width | 6.00″ | 152.4 mm |
| G | Overall Height | 40.43″ | 1026.9 mm |
*Note: Heights are measured from the top of the support table to the top of the hopper.
The leveling foot has a vertical adjustment of ±1.75”, allowing for a height variation between 1.00” and 4.50”. This may alter the discharge height.
Required Accessories for the FT-15-RD Unscrambler:
- Clockwise Square Tooling Frame and Backup Ring – BUCWFT30SU
- Counterclockwise Square Tooling Frame and Backup Ring – BUCCFT30SU
Shibuya Hoppmann Corporation strives to improve its products and reserves the right to change or discontinue specifications and designs shown in this information sheet without notice and without incurring obligation. Revised: 05/18.