Specialty Feeders and Unscramblers
Standard Products
FT-15-HD Heavy Duty Feeder
Product Overview
The new Hoppmann FT-15-HD Heavy Duty Feeder is engineered to handle small, metal parts traditionally oriented in vibratory feeders. The FT-15-HD offers greatly reduced noise output and smooth operation in comparison to a vibratory feeder, extremely accurate operational tolerances, and easily handles multiples sizes of parts with minor change over and no reduction in feed rate. The centrifugal feeder design is based on the same premise as our standard centrifugal feeder, the heavy duty feeder uses motors for speed, not springs and vibrators, which limits maintenance (retuning) and replacement requirements.
| Part Number | FT301RLASA | |
|---|---|---|
| Motor Style | AC | |
| Motor Voltage | 230/460V | |
| Horsepower | 1/3hp | |
| Total Equipment Weight | 350lbs./159kg | |
| Part Number | FT151RLASA |
|---|---|
| Motor Style | AC |
| Motor Voltage | 230 / 460V |
| Horsepower | 1 / 15hp |
| Total Equipment Weight | 134lbs. / 61kg |
Standard Features
- All stainless steel exterior construction
- FDA approved ABS vacuum formed disc
- Teflon Hardcoat Anodized aluminum bowl
- All stainless steel exterior construction
- Adjustable heavy duty feeder tooling frame
- Polyurethane hybrid bowl and disc
- Ball bearing spindle
- Poly-V Belt drive system
Available Options
- Polycarbonate covers
- Dual motor drive system
- Washdown motor(s)
- NEMA 1 encased controller
- Polycarbonate covers
- Dual motor drive system
- Washdown motor(s)
- NEMA 1 encased controller
| Product Specifications | ANSI | Metric | |
|---|---|---|---|
| A | Outside Diameter | 40.10″ | 1018.5 mm |
| B | Overall Frame Height | 27.13″ | 689.1 mm |
| C | Bowl Discharge Height * | 17.88″ | 454.2mm |
| D | Bowl Outside Diameter | 36.13″ | 917.7 mm |
| E | Bowl Inside Diameter | 28.80″ | 731.5 mm |
| F | Rim Width | 3.67″ | 93.2 mm |
| G | Bowl Depth | 4.50″ | 114.3 mm |
| H | Level Foot Adjustment * | 2.75″ | 69.9 mm |
| Product Specifications | ANSI | Metric | |
|---|---|---|---|
| A | Overall Diameter | 23.00″ | 584.0mm |
| B | Overall Height | 16.00″ ± 1″ | 405 ± 25 mm |
| C | Bowl Discharge Height | 12.75″ ± 1″ | 324 ± 25 mm |
| D | Bowl Inner Diameter | 16.00″ | 406.0 mm |
| E | Rim Width | 2.25″ | 57.0 mm |
The leveling foot has a vertical adjustment of ±1.75”, allowing for a height variation between 1.00” and 4.50”. This may alter the discharge height.
Required Accessories for the FT-15-RD Unscrambler:
- Clockwise Square Tooling Frame and Backup Ring – BUCWFT30SU
- Counterclockwise Square Tooling Frame and Backup Ring – BUCCFT30SU
Shibuya Hoppmann Corporation strives to improve its products and reserves the right to change or discontinue specifications and designs shown in this information sheet without notice and without incurring obligation. Revised: 05/18.