FT Series Centrifugal Feeder
Standard Products
FT-15-RD Unscrambler
Product Overview
Shibuya Hoppmann’s FT-15-RD unscrambler, one in a series of established, durable FT feeders, is ideally suited to efficiently feed and orient small to medium parts. The delivery rate varies from moderate to high speeds depending on part characteristics. The FT-15-RD unscrambler is time-tested and efficient, engineered to interface with prefeeders, accumulating conveyors, and assembly equipment.
| Part Number | FT301RLASA | |
|---|---|---|
| Motor Style | AC | |
| Motor Voltage | 230/460V | |
| Horsepower | 1/3hp | |
| Total Equipment Weight | 350lbs./159kg | |
| Part Number | FT151RLASA |
|---|---|
| Motor Style | AC |
| Motor Voltage | 230 / 460V |
| Horsepower | 1 / 5hp |
| Total Equipment Weight | 134lbs. / 61kg |
Standard Features
- All stainless steel exterior construction
- FDA approved ABS vacuum formed disc
- Teflon Hardcoat Anodized aluminum bowl
- All stainless steel exterior construction
- Square tooling frame
- Teflon Hardcoat Anodized aluminum bowl and disc
Available Options
- Polycarbonate covers
- Dual motor drive system
- Washdown motor(s)
- NEMA 1 encased controller
- Polycarbonate covers
- Dual motor drive system
- Washdown motor(s)
- NEMA 1 encased controller
| Product Specifications | ANSI | Metric | |
|---|---|---|---|
| A | Outside Diameter | 40.10″ | 1018.5 mm |
| B | Overall Frame Height | 27.13″ | 689.1 mm |
| C | Bowl Discharge Height * | 17.88″ | 454.2mm |
| D | Bowl Outside Diameter | 36.13″ | 917.7 mm |
| E | Bowl Inside Diameter | 28.80″ | 731.5 mm |
| F | Rim Width | 3.67″ | 93.2 mm |
| G | Bowl Depth | 4.50″ | 114.3 mm |
| H | Level Foot Adjustment * | 2.75″ | 69.9 mm |
| Product Specifications | ANSI | Metric | |
|---|---|---|---|
| A | Overall Diameter | 23.00″ | 584.0mm |
| B | Overall Height | 16.00″ ± 1″ | 405 ± 25 mm |
| C | Bowl Discharge Height | 12.75″ ± 1″ | 324 ± 25 mm |
| D | Bowl Inner Diameter | 16.00″ | 406.0 mm |
| E | Rim Width | 2.25″ | 57.0 mm |
The leveling foot has a vertical adjustment of ±1.75”, allowing for a height variation between 1.00” and 4.50”. This may alter the discharge height.
Required Accessories for the FT-15-RD Unscrambler:
- Clockwise Square Tooling Frame and Backup Ring – BUCWFT30SU
- Counterclockwise Square Tooling Frame and Backup Ring – BUCCFT30SU
- Clockwise Square Tooling Frame – BUCWFT15SU
- Counterclockwise Square Tooling Frame – BUCCFT15SU
Shibuya Hoppmann Corporation strives to improve its products and reserves the right to change or discontinue specifications and designs shown in this information sheet without notice and without incurring obligation. Revised: 05/18.